M-system R7L-SV4-R Instruction Manual page 9

■ FUNCTIONAL BLOCK: fbSV[0...3]
• Network Variables
TYPE
NETWORK
{ Range }
VARIABLE
{ Default }
{SNVT_lev_percent}
nvoSVVal {-163.840...163.835}
{0.0}
• Configuration Properties
CONFIGURATION NETWORK
PROPERTY VARIABLE
SCPTsceneNmbr ----
SCPTsndDelta nvoSVVal
SCPTsetpoint[0] nvoSVVal
SCPTsetpoint[1] nvoSVVal
SCPToffset nvoSVVal
SCPTgain nvoSVVal
SEN TRONIC
fbSV [0...3] (Object ID : 25...28)
Network Variables
Configuration Properties
fbSV :
SCPTsceneNmbr Set input range
nvoSVVal :
SCPTsndDelta Deviation level to send
SCPTsetpoint [ ] 0% and 100% setpoints
SCPToffset Zero adjustment
SCPTgain Span adjustment
EXPLANATIONS
% output proportional to the voltage/current at Input 0 through 3.
TYPE
{ Range }
{ Default }
{}
{0...11}
{0}
{SNVT_lev_cont}
{0.100...100.000}
{1.0}
{SNVT_lev_percent}
{-15.000...115.000}
{0.0}
{SNVT_lev_percent}
{-15.000...115.000}
{100.000}
{SNVT_lev_percent}
{-163.840...163.835}
{0.0}
{SNVT_muldiv
(mulplier,divisor)}
{0...32000,10000}
{10000,10000}
056 222 38 18
AG
nvoSVVal
nv 60
SNVT_lev_percent
...nv 63
EXPLANATIONS
Input range for Input 0 through 3
0 : -10.00 to 10.00 V
1 : -5.00 to 5.00 V
2 : -1.00 to 1.00 V
3 : 0.00 to 10.00 V
4 : 0.00 to 5.00 V
5 : 1.00 to 5.00 V
6 : 0.00 to 1.00 V
7 : -0.500 to 0.500 V
8 : 0.000 to 0.500 V
9 : -20.00 to 20.00 mA
10 : 4.00 to 20.00 mA
11 : 0.00 to 20.00 mA
Minimum deviation required to send out the network vari-
able.
nvoSVVal lower range voltage/current in % of the input
range. SCPTsetpoint[0] < SCPTsetpoint[1]
nvoSVVal upper range voltage/current in % of the input
range. SCPTsetpoint[0] < SCPTsetpoint[1]
nvoSVVal zero (offset) adjustment.
Added to the calculation result with SCPTsetpoint[0,1] and
SCPTgain.
nvoSVVal span (gain) adjustment.
Gain = Multiplier / 10000 (Divisor is fixed at 10000.)
Applied to SCPTsetpoint[0,1].
mailbox@sentronic.com www.sentronic.com
R7L-SV4
EM-7804-A Rev.5 P. 9 / 18