M-system R7L-SV4-R Instruction Manual page 11

• Configuration Properties
CONFIGURATION NETWORK
PROPERTY VARIABLE
SCPTnumDigits nviCVIn
SCPTnvType nviCVIn
SCPTnvType nvoCVOut
SCPTsetpoint[0] nviCVIn
SCPTsetpoint[1] nviCVIn
SCPTsetpoint[0] nvoCVOut
SCPTsetpoint[1] nvoCVOut
SEN TRONIC
TYPE
{ Range }
{ Default }
{SNVT_count}
{0,60...63}
{0}
{SNVT_nv_type}
{}
{SNVT_temp}
{SNVT_nv_type}
{}
{SNVT_temp}
Same as nviCVIn
Same as nviCVIn
Same as nvoCVOut
Same as nvoCVOut
056 222 38 18 mailbox@sentronic.com
AG
EXPLANATIONS
Source of the input to nviCVIn
0 : LonMaker bound output network variable
60 : fbSV[0] nvoSVVal
61 : fbSV[1] nvoSVVal
62 : fbSV[2] nvoSVVal
63 : fbSV[3] nvoSVVal
Match nviCVIn network variable type to that of the source
when using 60...63.
Indicates nviCVIn type.
For use with LonMaker and other tools.
Indicates nvoCVOut type.
For use with LonMaker and other tools.
Scaling setting
Output SCPTsetpoint[0] (nvoCVOut) is provided with the
input SCPTsetpoint[0] (nviCVIn).
Output SCPTsetpoint[1] (nvoCVOut) is provided with the
input SCPTsetpoint[1] (nviCVIn).
Output is proportionally provided to the input between
these setpoints.
SCPTsetpoint[0] < SCPTsetpoint[1]
www.sentronic.com
R7L-SV4
EM-7804-A Rev.5 P. 11 / 18