Clock Functions - Zanussi ZOHNA7X1 User Manual

Heating func‐ Application
tion
To clean the oven cavity. Refer
to "Care and cleaning" chapter
for more information about:
Aqua Clean
Aqua Clean.
7.4 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements. Tests according to:
BS EN 60350-1

8. CLOCK FUNCTIONS

8.1 Clock functions table
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
8.2 How to set: Time of day
After the first connection to the mains, wait
until the display shows: hr, 12:00. 12 -
flashes.
Step 1 Turn the knob for the temperature to set the hour.
Step 2
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
Step 3 Turn the knob for the temperature to set the minutes.
The oven door should be closed during
cooking so that the function is not interrupted
and the oven operates with the highest
energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
Application
To show or change the time of day. You can change the time of day
only when the oven is off.
To set the length of cooking. Use only when a heating function is set.
To set the oven turn-off time. Use only when a heating function is set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on the operation
of the oven.
Minute Minder - can be set at any time, also if the oven is off.
ENGLISH 11