Edit Ing Recorded M Ds - Sony MDS-S40 Operating Instructions Manual

Minidisc deck

Hide thumbs Also See for MDS-S40:

Table of Contents

Edit ing

Recorded M Ds

This chapter explains how to edit the

tracks that have been recorded on an

MD.

Downloaded from:

https://www.usersmanualguide.com/

` / 1

Brief descript ions of but t ons and cont rol

used t o edit M Ds

The buttons and the control below are used to erase,

divide, move, or combine tracks on the MD.

Note

The operation of these buttons and the control is different when

naming a track or MD. For details, see "Naming a Track or MD"

on page 33.

M ENU/ NO button: While the deck is stopped, playing,

or paused, press to edit tracks. While editing, press to

cancel editing.

AM S control: Turn to select an editing operation or track

number, then press to enter your selection. You can also

use the control to specify points in a track for erasure or

track division.

YES button: Press this button instead of the AMS control

to enter a selection.

m / M buttons: Press to specify the unit (minute,

second, or frame) by which the MD is advanced when the

AMS control is turned. You can also use these buttons to

locate the end point of the portion to be erased.

For further details on the function of each button and

control, see the sections on editing operations.

M ENU/ NO

AM S YES

m/M

Table of Contents