Display Messages - Sony MDS-S40 Operating Instructions Manual

General
Pow er requirements
Where purchased
U.S.A. and Canada
U.K., Continental Europe, and
Argentina
Australia
Certain countries in Asia
Other countries
Pow er consumption
Dimensions (approx.)
M ass (approx.)
Supplied accessories
See page 4.
Opt ional accessories
Recordable M Ds
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
Design and specifications are subject to change without notice.
42
Downloaded from: https://www.usersmanualguide.com/
Pow er requirements
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
240 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
110 - 120 or 220 - 240 V AC
selectable, 50/60 Hz
15 W
280 × 90 × 285 mm (11 × 3
1 5
/ /
8 8
1
11 / inches) (w/h/d) incl.
4
projecting parts and controls
3.0 kg (6 lb 8 oz)
MDW-60 (60 min), MDW-74 (74 min)
Display M essages
The following table explains the various messages that
appear in the display. Messages are also displayed by the
deck's Self-Diagnosis function (see page 44).
M essage
Auto Cut
Blank Disc
Cannot Copy
Cannot Edit
×
Disc Full
Impossible
Initialize (flashing)
Name Full
No Disc
No Name
No Program!!
Premastered
ProgramFull!
REMOTE
Smart Space
TOC Reading
If "REMOTE" appears under other circumstances, turn off the deck,
*
then turn it on again.
M eaning
The Auto Cut function is on (page 17).
A new (blank) or erased MD has been
inserted.
An attempt was made to make a second
copy from a digitally dubbed MD (page
14).
An attempt was made to edit the MD
during Program or Shuffle Play. Or the
MD is record-protected.
The MD is full (page 40).
The deck cannot do the specified
operation.
The Setup Menu settings have been lost.
The naming capacity of the MD has
reached its limit (about 1,700 characters).
There is no MD in the deck.
The track or disc has no name.
You tried to start Program Play when no
program exists.
An attempt was made to record on a
premastered MD.
The program contains the maximum
number of tracks. You cannot add any
more tracks.
The MD deck is being controlled by an
external device connected to the deck.
The Smart Space function is on (page 17).
The deck is checking the TOC (Table Of
Contents) on the MD.
*