Advertisement
Available languages
Available languages
The radio equipment of the device complies with the requirements of the directive 2014/53/EU. You can find
the Declaration of Conformity of the device on http://documents.dometic.com.
5
Installation
Mounting the battery monitor
NOTICE! Damage hazard
Using wrong cables can lead to excessive overheating of the cables, high voltage drops, and possi-
ble failures. Use only the cable supplied.
1.
Mounting the display:
fig.
on page 1
2. iManager12-150 only: Connecting the display panel to the control unit:
fig.
on page 2
3. Mounting the control unit:
fig.
on page 3
Connecting the battery monitor
Note The specified value for the fuse of the house battery is a reference value. Use a fuse
that is at least 30 % higher than the maximum current of the house battery used.
Proceed as shown:
General connection
fig.
on page 4
No.
Component
A
Option for wireless display connections
B
Option for wireless display connections
1
Display (optional)
2
Control unit
3
Wireless display (optional)
4
Temperature sensor for house battery 2
Connection variant A
fig.
on page 5
fig.
on page 2
fig.
on page 4
No.
Component
5
House battery 2
6
Temperature sensor for house battery
7
House battery 1
8
Additional 12 V devices
9
Starting battery
15
Advertisement
