Table of Contents
Advertisement
Loosen and remove all bolts of the 4
2.
transport locks with a SW13 open-
end wrench
.
Remove the mains connection cable from
3.
the holder.
Remove the 4 sleeves.
4.
Set up and connectNL
Install the 4 cover caps.
5.
Push the 4 cover caps down.
6.
4.5 Connecting device
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
Do not immerse the electric
▶
Aquastop valve in water.
15
Advertisement
Table of Contents
