Table of Contents
Advertisement
17.1 Emergency release
unlock door
Required:The drain pump is empty.
→ Page 39
1. ATTENTION!Running water can
lead to material damage.
▶
Do not open the door if water can
be seen behind the glass.
Pull down and release the
emergency release with the aid of a
tool.
aThe door lock is unlocked.
Place the service door and click it into
2.
place.
Close the service door.
3.
18 Transport, on-
hit and drain
18.1 Dismantling the device
Remark:More information can be
found in the digital operating
instructions by scanning the QR code
in the table of contents or at
siemenshome.bsh-group.com .
Close the tap.
1.
Water supply hose
2.
Switch off the device
3.
Remove the plug
4.
from the socket.
empty.
ate out.
device from the
Transport, storage and disposalNL
Let the suds drain.
5.
→
"Cleaning the drain
pump", page 39
Disassemble the hoses.
6.
18.2 Installing transport locks
Secure the device before transport
with the transport locks to avoid
damage.
Remove the 4 cover caps using a
1.
screwdriver.
Keep the cover caps.
Install the 4 transport locks. Keep
2.
the description
→ "Remove transport locks", page
14 and proceed in reverse order.
18.3 Restarting the device
For more information, see
▶
→
"Setting up and
connecting", Page 13 and
→ "Start the wash cycle without
laundry", page 20 .
51
Advertisement
Table of Contents
