Table of Contents
Advertisement
Remove the 4 sleeves.
4.
Install the 4 cover caps.
5.
Slide the 4 cover caps downwards.
6.
Remark:To place the transport locks
in the device for transport, make
them
undo steps in the reverse
the sequence.
Set up and connectNL
4.5 Connecting device
Connect water supply hose
Connect the water supply hose to the
1.
appliance.
Connect the water inlet hose to the
2.
tap (26.4 mm = 3/4").
Open the tap carefully and check
3.
that the connections are tight.
Water drainage connection types
The information will help you connect this
appliance to the water outlet.
PAY ATTENTION!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
Secure the water drain hose against
unintentional disconnection.
15
Advertisement
Table of Contents
