Table of Contents
Advertisement
NLusage
select ma settings in the main menu
and settings in the submenus.
Main menu
To choose program settings, press
the buttons above or below the
symbols.
The selected program setting is
shown in the center of the display.
submenu
To select settings, press the buttons
below the symbols until the desired
setting is selected on the display.
To select settings, press the buttons
below the symbols,
until the desired setting
play is selected.
20
ling on the display
When a setting is activated, the display
shows . The selection does not need
to be confirmed again.
The submenu closes automatically
after a few seconds.
6 Before first use
Prepare the device for use.
6.1 Starting a wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory. To
remove any residual water, wash
without any laundry the first time.
Press .
1.
The power-on process takes a few
seconds.
The programCleaning the drum Set
2.
up.
Close the door.
3.
Pull out the detergent drawer.
4.
Advertisement
Table of Contents
