Advertisement
Quick Links
Item# BP-RSWD44-W12
ROSALIND WRITING DESK
ASSEMBLY INSTRUCTIONS
IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE
To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
Advertisement
Related Manuals for Bassett INSPIRED BP-RSWD44-W12
Summary of Contents for Bassett INSPIRED BP-RSWD44-W12
- Page 1 Item# BP-RSWD44-W12 ROSALIND WRITING DESK ASSEMBLY INSTRUCTIONS IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
-
Page 2: Limited Warranty
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s responsibility to prepay freight on any components returned to the factory. INSPIRED by Bassett will pay return freight on ®... -
Page 3: Parts List
PARTS LIST... -
Page 4: Hardware List
HARDWARE LIST THANK YOU for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Identify and count all parts and compare with the parts and hardware lists. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - Page 5 STEP 1: Place Desk Top (1) face down on a flat, non-marring surface. Carefully pull drawer out of Desk Top (1) by pulling up on drawer slide lever on one side and pressing down on lever on other side. STEP 2: Insert four Wood Dowels (A) into holes in Desk Top (1).
- Page 6 STEP 3: Attach Bottom Metal Rail (5) to rear of Left Side Frame (2) and Right Side Frame (3) using two Bolts (C), two Spring Washers (D) and two Flat Washers (E). FULLY TIGHTEN BOLTS (C) USING WRENCH (F). STEP 4: Attach Cross Rod (4) to rear of assembly using four Bolts (C), four Spring Washers (D) and four Flat Washers (E).
- Page 7 STEP 5: Carefully turn desk to the upright position and slide drawer into desk. IMPORTANT: MAKE SURE ALL BOLTS ARE SECURELY TIGHTENED BEFORE USING THIS PRODUCT.
- Page 8 FURNITURE CARE: - Dust with a soft cloth following the grain pattern of the wood. - Dust often to remove the everyday abrasive particles from the wood surfaces. - Before dusting, moisten cloth lightly with a spray product. - Wood finishes also benefit from an occasional polishing. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m.