Advertisement
Quick Links
Item# BP-BARCSL4
BARCELONA 4 DOOR CONSOLE
ASSEMBLY INSTRUCTIONS
IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE
To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
Advertisement
Related Manuals for Bassett ISPIRED BP-BARCSL4
Summary of Contents for Bassett ISPIRED BP-BARCSL4
- Page 1 Item# BP-BARCSL4 BARCELONA 4 DOOR CONSOLE ASSEMBLY INSTRUCTIONS IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
-
Page 2: Limited Warranty
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s responsibility to prepay freight on any components returned to the factory. INSPIRED by Bassett will pay return freight on ®... -
Page 3: Parts List
PARTS LIST (2) Bottom Frame (1 PC) (1) Top Frame (1 PC) (4) Right Side Frame (1 PC) (3) Left Side Frame (1 PC) (5) Divider (1 PC) (6) Left Back Panel (1 PC) (7) Right Back Panel (1 PC) (8) Left Door (2 PCS) (9) Right Door (2 PCS) (10) Shelf (2 PCS) -
Page 4: Hardware List
HARDWARE LIST DRAWING DESCRIPTION SIZE QTY. Small Bolt 1/4” x 1/2” 2 PCS Medium Bolt 1/4” x 9/5” 4 PCS Long Bolt 1/4” x 2” 8 PCS Connector Bolt 1/4” x 2/5” 2 PCS Small Screw 1/8” x 5/8” 16 PCS Large Screw 1/8”... - Page 5 HARDWARE LIST DRAWING DESCRIPTION SIZE QTY. Anti-Tip Kit n / a 1 PC Back Lid n / a 2 PCS Center Leg n / a 1 PC Allen Wrench 1/5” 2 PCS Socket Wrench 2/5” 1 PC Triangle n / a 1 PC Phillips Screwdriver also needed for assembly (not provided).
- Page 6 STEP 1: Attach Top Frame (1) and Bottom Frame (2) to Divider (5) using two Long Bolts (B), two Lock Washers (J) and two Flat FULLY TIGHTEN ALL BOLTS. Washers (H) for each frame. STEP 2: Attach Back Lid (O) to Back Panels (6 & 7) using one Small Bolt (A), one Flat Washer (I) and one Connector Bolt (D). FULLY TIGHTEN ALL BOLTS.
- Page 7 STEP 3: Slide Back Panels (6 & 7) into groove of Top Frame (1) and Bottom Frame (2). STEP 4: Secure Left Side Frame (3) and Right Side Frame (4) to console using four Long Bolts (C), four Lock Washers (J) and four FULLY TIGHTEN ALL BOLTS.
- Page 8 STEP 5: Line up Back Panels (6 & 7) using Triangle (Q) and tighten Screws (F & E). Screw in Center Leg (P) into assembled console. FULLY TIGHTEN ALL SCREWS. STEP 6: FULLY TIGHTEN ALL NUTS. Attach Handles (M) to Doors (8 & 9) using two Flat Washers (G) and two Nuts (K) for each handle.
- Page 9 STEP 7: Attach Doors (8 & 9) to assembled console. STEP 8: Insert Shelf Pins (L) into assembled console. Slide Shelves (10) into assembled console. (10) (10)
- Page 10 STEP 9: Place Console (1) in desired location. Attach two brackets to back of Console (1) using two short screws for each bracket. FULLY TIGHTEN SCREWS. Attach the remaining brackets to wall using two long screws for each bracket. FULLY TIGHTEN SCREWS. Loop one safety strap between each set of brackets and fasten safety straps.
- Page 11 FURNITURE CARE: - Dust with a soft cloth following the grain pattern of the wood. - Dust often to remove the everyday abrasive particles from the wood surfaces. - Before dusting, moisten cloth lightly with a spray product. - Wood finishes also benefit from an occasional polishing. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m.