Table of Contents
Advertisement
Super X13SEED-F/-SF User's Manual
Commit Changes and Exit
Press <Enter> to save changes and exit.
Discard Changes and Exit
Press <Enter> to discard changes and exit.
Save Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
PCIe/PCI/PnP Configuration
The following information is displayed:
• PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding (Available when the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
MMCFG Base
This feature determines how the lowest Memory Mapped Configuration (MMCFG) base is
assigned to onboard PCI devices. The options are 1G, 1.5G, 1.75G, 2G, 2.25G, 3G, and Auto.
MMCFG Size
Use this feature to set the MMCFG size. The options are 64M, 128M, 256M, 512M, 1G, 2G,
and Auto. Note that the MMCFG size is based on the memory populated.
MMIO High Base
Use this feature to select the base memory size according to memory-address mapping for
the IO hub. The options are 56T, 40T, 32T, 24T, 16T, 4T, 2T, 1T, and 512G.
MMIO High Granularity Size
Use this feature to select the high memory size according to memory-address mapping for
the IO hub. The options are 1G, 4G, 16G, 64G, 256G, and 1024G.
SR-IOV Support
Select Enabled for Single-Root IO Virtualization support. The options are Disabled and
Enabled.
ARI Support
Use this feature to enable or disable alternate routing ID (ARI) support. The options are
Disabled and Enabled.
94
Advertisement
Table of Contents
