Impax IM-MIG120 Instruction Manual page 24

TIG ASSEMBLY
TIG Welding
Insert the cable plug with the earth clamp into
the "+" socket on the front panel of the welding
machine, and tighten it clockwise.
Insert the cable plug of the TIG torch (not
provide) into the "-" socket on the front panel of
the machine and tighten clockwise.
Fig 4
1.0
0.9
WIRE 0.8
SELECTION
MIG
MMA
WELDING TIG
MODE
A
1 10
Earth Clamp
Connect the gas hose to the regulator /
flowmeter located on the shield gas cylinder and
connect the other end to the machine (Fig.4).
23
Gas
Hose
TIG Torch