Impax IM-MIG120 Instruction Manual page 23

MIG ASSEMBLY (NO GAS)
MIG Welding (No Gas)
Insert the cable plug with the earth clamp into
the "+" socket on the front panel of the welding
machine, and tighten it clockwise.
The MIG torch is permanently attached to the
connector socket on the front panel of the
machine.
Fig 3
Connect the welding power lead to the "-"
socket on the front panel of the welding
machine, and tighten it clockwise, Fig.3.
1.0
0.9
WIRE 0.8
SELECTION
MIG
MMA
WELDING TIG
MODE
A
1 10
MIG Torch
22
GAS IN
ON
AC230V
OFF
GAS IN
Earth Clamp