Compensating The Exposure; Vqt0V10 - Panasonic Lumix DMC-LS2 Operating Instructions Manual

Advanced
Compensating the
Exposure
SCN
Use this function when you cannot achieve
appropriate exposure due to the difference
in brightness between the subject and the
background. Look at the following
examples.
Under exposed
Compensate the exposure towards
positive.
Properly exposed
Compensate the exposure towards
42

VQT0V10

1 2
SCN
Over exposed
negative.
1 Press 3 [
] until [EXPOSURE]
appears, compensate the
exposure with 2/1.
EXPOSURE
SELECT
• You can compensate from [j2 EV] to
[i2 EV] in steps of [1/3 EV].
• Select [0 EV] to return to the original
exposure.
2 Press [MENU/SET] to finish.
• You can also press the shutter
button halfway to finish.
• EV is an abbreviation of [Exposure Value].
It refers to the amount of light given to the
CCD by the aperture value and the shutter
speed.
• The exposure compensation value
appears on the lower left of the screen.
• The set exposure value is memorized
even if the camera is turned off.
• The compensation range of the exposure
will be limited depending on the
brightness of the subject.
• Exposure cannot be compensated when
using [STARRY SKY] in scene mode.
MENU
EXIT