Panasonic Lumix DMC-LS2 Operating Instructions Manual page 27

• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P62):
– [ ENLARGE]:
/ (5M)/Fine
– [ 4qk6q/10k15cm]:
/ (2.5M EZ)/Standard
– [ E-MAIL]:
/ (0.3M EZ)/Standard
• [AF MODE] (P63):
[ ] (1-area-focusing)
• [SLOW SHUTTER] (P64):
[1/8 – ]
• You cannot use the following functions in
simple mode.
– High angle mode
– White balance fine adjustment
– Exposure compensation
– Auto bracket
– [D.ZOOM]
– [COL.EFFECT]
– [PICT.ADJ.]
∫ The Backlight Compensation
Backlight refers to when light comes from
the back of a subject.
In this case, the subject, such as a person,
will become dark.
If you press 3, [
backlight ON indication) A appears and the
backlight compensation function is
activated. This function compensates the
backlight by brightening the whole of the
picture.
3
BACKLIGHT
• If you press 3 while [
[ ] disappears and the backlight
compensation function is canceled.
• We recommend using the flash when you
use the backlight compensation function.
] (compensating
BACKLIGHT
] is displayed,
(When using the flash, it is fixed to Forced
ON [ ].)
• The flash setting is fixed to AUTO/
Red-eye reduction [
backlight compensation function is set to
[OFF].
3
Basic
] when the
27
VQT0V10