Panasonic Lumix DMC-LS2 Operating Instructions Manual page 78

Connecting to other equipment
• Connect the USB connection cable with
the [ ] mark facing the [1] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at C
and insert straight in or take straight
out.
3 Press 4 to select [PictBridge
(PTP)] and then press
[MENU/SET].
USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
SELECT
• If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a PC. (P22)
• Do not use any other USB connection
cables except the supplied one.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can edit
or access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want
to switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the printer again.
• To print the age in [BABY1]/[BABY2]
(P53) in scene mode, use the software
[LUMIX Simple Viewer] in the CD-ROM
(supplied) and print from the PC. For
information about this, refer to the
separate operating instructions for PC
connection.
78
VQT0V10
MENU
SET
MENU
SET
• To find out more about PictBridge
compliant printers, contact your local
dealer.
∫ Single picture
1 Press 3 to select
[SINGLE PICTURE] and then
press [MENU/SET].
PictBridge
SINGLE PICTURE
DPOF PICTURE
SELECT
2 Press 2/1 to select the picture
and then press 4.
PictBridge
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
• The message disappears in about
2 seconds.
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
∫ Setting date printing, the number of
prints, the paper size and the page
layout
Select and set each item in step 3.
MENU
SET
MENU
SET
100 _ 0001
1/3
MENU
EXIT
１秒
1 OFF
MENU
SET
MENU
SELECT SET