Inserting/Removing The Batteries; Vqt0V10 - Panasonic Lumix DMC-LS2 Operating Instructions Manual

The number of recordable pictures in
low temperatures
(In normal picture mode when the
temperature is 0 °C (32 °F) and other
recording conditions comply with CIPA
standard.)
Batteries Used
Panasonic Oxyride
batteries (supplied
or optional)
Panasonic Alkaline
batteries (optional)
Fully charged
Panasonic Ni-MH
batteries (optional)
• Please note that the performance of
oxyride batteries and alkaline batteries
significantly decreases in low temperature
conditions.
Playback time
Batteries Used
Panasonic Oxyride
batteries (supplied
or optional)
Panasonic Alkaline
batteries (optional)
Fully charged
Panasonic Ni-MH
batteries (optional)
• The number of recordable pictures and
playback time will vary depending on the
operating conditions and how the battery
is stored.
• The number of recordable pictures and
the playback time will also vary depending
on the brand and type of batteries used.
• We recommend using power save mode
(P20) or economy mode (P46) or turning
off the camera frequently while recording
to maintain battery power.
Number of recordable
pictures
Approx. 45 pictures
(Approx. 22 min)
Approx. 35 pictures
(Approx. 17 min)
Approx. 360 pictures
(Approx. 180 min)
Continuous playback
time
Approx. 420 min
Approx. 410 min
Approx. 510 min
Inserting/Removing
the Batteries
• Check that the camera is turned off and
that the lens is retracted.
• Use oxyride batteries (supplied), alkaline
batteries (optional) or Ni-MH batteries
(optional).
1 Slide the battery door to open it.
2 Insert the batteries with the
poles aligned correctly.
-
3 1 Close the battery door.
2 Slide the battery door to the
end and then close it firmly.
• Select the battery type being used in
[BATTERY TYPE] in the [SETUP] menu.
(P20)
• Remove the batteries after use.
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately
3 months even if the batteries are removed.
Preparation
and
+
15

VQT0V10