Download Print this page

MadgeTech TSR101-EB Product Information Card

Product information card

Advertisement

Quick Links

Description
Acceleration Sensor
Accelerometer Type
Acceleration Range
Acceleration Resolution
Calibrated Accuracy
Memory
Reading Rate
Frequency Response
0Hz to approximately 400Hz (50, 100 g)
Typical Battery Life
Required Interface Package
Baud Rate
Operating Environment
-20 °C to +54 °C, 0 to 95%RH non-condensing
Dimensions
5.5" x 5.4" x 3.2" (140 mm x 137 mm x 80 mm)
Materials
Weight
Approvals
*TSR101-EB Acceleration Range, Resolution and Accuracy
Range (g)
+5
Resolution (g)
0.01
Accuracy (g)
+0.2
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 54 °C (129 °F).
1.888.610.7664
TSR101-EB
Shock (3 axes)
MEMS Semiconductor
*See Table for Details
349,471/channel
1,024Hz to 1 second
30 days typical
IFC200
115,200
Anodized aluminum
5lbs (2.3kg)
CE
+50
+100
+250
0.05
0.1
0.2
+1
+2
+4
DOC-1164035-00 REV 8 01.23.2018
www.calcert.com
10
15
20
5
25
0
30
Product Information Card
TSR101-EB-5
Tri-Axial +5g, Transient Shock Data Logger with an Extended Battery Life
TSR101-EB-50
Tri-Axial +50g, Transient Shock Data Logger with an Extended Battery Life
TSR101-EB-100
Tri-Axial +100g, Transient Shock Data Logger with an Extended Battery Life
TSR101-EB-250
Tri-Axial +250g, Transient Shock Data Logger with an Extended Battery Life
sales@calcert.com
TSR101-EB
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289

Advertisement

loading

Summary of Contents for MadgeTech TSR101-EB

  • Page 1 -20 °C to +54 °C, 0 to 95%RH non-condensing Dimensions 5.5” x 5.4” x 3.2” (140 mm x 137 mm x 80 mm) Materials Anodized aluminum Weight 5lbs (2.3kg) Approvals *TSR101-EB Acceleration Range, Resolution and Accuracy Range (g) +100 +250 Resolution (g) 0.01 0.05 TSR101-EB-5 Accuracy (g) +0.2...
  • Page 2 - IFC200 Recalibration Insert the device into a USB port. The drivers will install automatically. The TSR101-EB standard calibration is performed at 0 g for the x-axis, 0 g for the y-axis and 1 g for the z-axis. Installing the software Note: The shock parameters are not traceable to NIST.

This manual is also suitable for:

Tsr101-eb-5Tsr101-eb-50Tsr101-eb-100Tsr101-eb-250