Connecting To An Electrical Outlet - Panasonic Lumix DMC-F1 Operating Instructions Manual

Connecting to an Electrical Outlet

1
Preparation
If you use an AC adaptor as indicated in 3,
you can use the camera without worrying
about battery discharge.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
1
2
3
3
2
14
Connect the AC cable.
Open the DC IN terminal door 1.
• It is also possible to connect the DC cable to
the camera with the Memory Card/battery
door opened.
Connect the DC cable (supplied) to
the camera.
• The camera becomes warm during use.
However, this is not a malfunction.
• Disconnect the AC adaptor and DC cable
when camera is not in use.
• The battery cannot be charged in the
camera with the AC adaptor connected.
• Use the supplied DC cable.