Connecting To An Electrical Outlet - Panasonic DMC-LC5PP Operating Instructions Manual

Hide thumbs Also See for DMC-LC5PP:
Table of Contents

Advertisement

16
i
Charging time and available recording time
(It records nce at intervals of 30 seconds. Frash fires 1 time to 2 'mies:
E When the: Supplied 32 MB SD memory Card is used)
In setting LCD monitor to ON
Supplied
Approx.
Approx. 120 min.
(equal to 240 still pictures)
In setting LCD monitor to OFF
Approx. 180 min.
(equal to 360 still pictures)
battery pack
120 min.
® Charging time
Continuous recording time (recordable number)
E Charging environment and charging error
+ Charge the battery in a place with the temperature of 10 - 35 °C. (The battery
should also be the same temperature)
`
* When charging starts, the status indicator blinks at about 2 second intervals.
If, after charging starts, the status indicator blinks quicker, this indicates a
charging error.
In this case, remove the AC adaptor from the electrical outlet, remove the
battery and check if both room and battery temperature is too low or high and
then charge it again. (It is not possible to cancel the error by only turning the
power off/on) If the problem persists, consult the dealer.
Connecting to an Electrical Outlet
If you use an AC adaptor and connect it to an electrical outlet, you can use the
camera without worrying about the battery discharge. The connection method
is the same as explained in "Charging the Battery". (P15)
¢ During use, the camera becomes warm; this is not a malfunction.

Advertisement

Table of Contents
loading

Table of Contents