Warning Indications - Panasonic Lumix DMC-F1 Operating Instructions Manual

Panasonic lumix dmc-f1: user guide
Table of Contents

Advertisement

Warning Indications

[NO MEMORY CARD]
Insert the Memory Card.
[THIS MEMORY CARD IS
PROTECTED]
Cancel the Memory Card lock.
[NO VALID IMAGE TO PLAY]
Carry out playback after recording or
after inserting the Memory Card with a
recorded image.
[MEMORY CARD FULL] / [NO
ENOUGH MEMORY IN THE CARD]
Insert a new Memory Card or delete
unnecessary data.
[MEMORY CARD ERROR]
Failed access to Memory Card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera [OFF] and remove the
card. Then insert the card and turn the
camera back [ON]. Be sure camera is
[OFF] before removing or inserting the
card to avoid damaging the card.
[PLEASE SET THE CLOCK]
This message is displayed when you
use the camera for the first time or you
do not use the camera for a long time.
Set the clock again.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, you
can delete or overwrite the image.
Others
[THIS PICTURE CAN'T BE
DELETED] / [SOME PICTURES
CAN'T BE DELETED]
If the image is not based on the DCF
standard, it is not possible to delete
selected pictures.
[NUMBER OF PRINT IS OVER]
You have exceeded the number of
images that can be set at once with
multi-deleting setting.
[CAN'T BE SET ON THIS PICTURE]
/ [CAN'T BE SET ON SOME
PICTURES]
If the image is not based on the DCF
standard, it is not possible to set the
DPOF.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The format of this card cannot be
recognized by the camera. Format the
card again with the camera.
[REC MODE DIAL IS NOT IN THE
PROPER POSITION]
This message is displayed when you
turn on the camera with the mode dial in
the wrong position.
Rotate the mode dial to the proper
position.
88

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents