Configuring Rs-232 Settings - HIKVISION DS-2CD2786G2-IZS User Manual

2. Select the start time and the end time.
3. Select the DST Bias.
4. Click Save to activate the settings.

6.2.4 Configuring RS-232 Settings

The RS-232 port can be used in two ways:
 Console: Connect a computer to the camera through the serial port. Device
parameters can be configured by using software such as HyperTerminal. The serial
port parameters must be the same as the serial port parameters of the camera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
Steps:
1. Enter RS-232 Port Setting interface: Configuration > System > System Settings >
RS-232.
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-
Network Camera User Manual
DST Settings
RS-232 Settings
48