Table of Contents
Advertisement
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click
to finish the setting of the current preset.
4. You can click
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or
automatically when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
preset.
Or you can place the mouse on the presets interface, and call the preset by typing
the preset No. to call the corresponding presets.
Network Camera User Manual
Setting a Preset
to delete the preset.
40
to call the
Advertisement
Table of Contents
