Advertisement
Step 1:
During Mounting the Large Side Stand, let the
Motorbike firmly rest on the floor, using the
Centre Stand.
The side stand can be brought forward
(position as shown in the drawing) to have
access to the Mounting/ Assembly of the SRC
Large Side Stand.
Step 3:
Orient and align the Middle Plate (6), as
shown, and in-line with the 4 off Mounting
hole in the Upper plate.
The Middle plate's inner walls closely hug the
outer peripheral walls of the Side-stand base.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 2:
Orient and slip-in the Upper Plate (2),
through the Open cut-out and pass the
shank of the Side-stand, as shown.
Page 3
Advertisement
