Advertisement
Step 5:
Orient and Stack the Plates closely, as shown
and check for any slackness.
The Countersunk screws to flush into the
countersunk bores of the Lower Plate.
Slip-in the Nut M6 (7) – 4 off from the top
side and secure the threads on the
Countersunk screws.
Copyright By SRC
Design and Specification are subjected to change
Step 4:
Slip-in the Buffer Plate (3), Spacer (4) – 4 off
and Lower Plate (1), as shown and in-line with
the mounting holes.
Slip-in the Countersunk screw M6 x 35 (5) – 4
off through the bottom side of the lower
plate.
Page 4
Advertisement
