Sharp KC-G60TA Operation Manual page 27

US SETTINGS
Type of setting
Light Control
You can select the brightness of the
Front Display, Cleanliness Monitor
and Air Outlet LED.
Sound Indicator Setting
You can set the unit to make a
beeping sound when the Water
Tank is empty.
Auto Restart
If the unit is unplugged or if there is
a power failure, the unit will resume
operation with the previous settings
after power is restored.
Adjusting Senser Sensitivity (F4-F7)
Light Sensor
Dust(sensitive) Sensor
Odor Sensor
(KC-G60 / KC-G50)
Motion Sensor
(KC-G60 / KC-G50)
You can set the time until the
Motion Sensor detects that no
one is in the room . You can also
cancel Motion Sensor sensing.
KC-G60TA_G50TA_G40TA.indd
Function
10
Setting
Auto
(default)
Light automatically switches ON or OFF based
on room brightness.
Room is bright: light is ON
Room is dark: light is OFF
Darker
Turn off
● When set to "Turn off", the "Darker" light
illuminates for 3 seconds after operation
starts and then the light turns off.
● The Humidity Light flashes darker only when
the unit needs water.
Cancellation
ON
Cancellation
ON
(default)
Low
Standard
(default)
High
ON(Standard sensing time )
ON(Longer sensing time)
Cancellation
E-10
(default)
(default)
2017/05/23 16:27:00