3Com Network HotSync Handbook page 22

Network Command
The Network command is added to the HotSync Manager menu
when you install the network HotSync software. The Network
command must be checked before you perform a dial-in
network HotSync operation or a direct network HotSync
operation. When you install the network HotSync software, this
automatically checks (activates) the Network command. Click
the Network command to check and uncheck it.
Network Setup Options
When you install the network HotSync software, a Network tab
appears in the Setup dialog. You can use this tab to select a user
name and to view TCP/IP settings. In most cases, the only
information you might need to enter is the Subnet Mask
address.
page 20 Network HotSync Handbook