Steering Column Tilt Lever; Cap With Lock; Method Of Opening And Closing Cap With Lock - Komatsu WA250-3 Operation & Maintenance Manual

OPERATION

11.4 STEERING COLUMN TILT LEVER

Stop the machine before adjusting the angle of the steering wheel
This lever allows the steering column to be tilted forward or backward.
Pull the lever up and move the steering wheel to the desired position. Then
push the lever down to lock the lever in position.
Range of adjustment: 125 mm (4.922 in)

11.5 CAP WITH LOCK

The fuel tank filler port and the hydraulic tank filler port are equipped with
locks.
Use the starter key to open and close the cap as follows.

11.5.1 METHOD OF OPENING AND CLOSING CAP WITH LOCK

TO OPEN THE CAP (For the fuel tank filler port)
1. Insert the key into the cap.
insert the key as far as it will go. If the key is turned before it is inserted all
the way in, it could break.
2. Turn the key clockwise, align the match mark on the cap with the rotor
groove, then remove the cap.
TO LOCK THE CAP
1. Turn the cap into place.
2. Turn the key clockwise and take the key out.
2-24
WARNING
(Step less)