Special Applications; Making Connections - LEADING EDGE SAFETY X-CALIBUR Instruction Manual

9.0 SPECIAL APPLICATIONS

E
9.1 DISSIMILAR HEIGHT WALKING/WORKING SURFACES
N
G
9.1.A
L
I
S
H

10.0 MAKING CONNECTIONS

10.1 SRL's and lifelines shall only be connected to the 1-Ring Fall Arrest Attachment Points or to Fall Restraint
D-Rings. FIG 10-1
10.2 Only use self-locking snap hooks and self-locking carabiners when connecting SRL and lifelines to the
X-CALIBUR. Only use connectors that are suitable to each application. Ensure connections are compatible in
size, shape and strength. Do not use equipment that is not compatible with the X-CALIBUR connection points.
10.4 Ensure that all connections are fully closed, locked and secure prior to use.
X-C
ALIBUR
The X-CALIBURmay be used for fall arrest in dissimilar height applications where
worker(s) are located on a surface lower than the surface the X-CALIBUR is positioned on and when
properly set up and used with an SRL ANSI approved for leading edge conditions. FIG 9-1
I M
NSTRUCTION
FIG 9-1
FALL ARREST ATTACHMENT POINT
15
ANUAL
FIG 10-1