Table of Contents
Advertisement
5.0 HOISTING OR LIFTING
5.1
Loads may slip or fall if the X-CALIBUR is not hoisted or lifted properly and may result in injury or death.
5.2
Never hoist or lift the X-CALIBUR if any of the hoisting rings/fork pockets are damaged.
5.3
Never hoist or lift the X-CALIBUR with unsecured materials on the unit.
5.4
Ensure any auxiliary equipment is properly and securely attached to the X-CALIBUR before hoisting or lifting.
5.5
Ensure Hoisting Guide Ring/Fork Pockets are secured with Wire-Lock Clevis Pins before hoisting or lifting.
5.6
The X-CALIBUR shall be hoisted or lifted following good industry practices, State and Federal Regulations, and
hoisting and lifting equipment manufacturer's guidelines.
5.7
The X-CALIBUR was designed be to hoisted by a crane or lifted by a forklift and is equipped with dual purpose
hoisting guide rings/fork pockets.
6.0 GENERAL SAFETY
6.1
USE COMMON SENSE! Most accidents can be avoided by using common sense and focusing on the job
at hand.
6.2
The X-CALIBUR should not be used by persons whose ability or alertness is impaired by fatigue, intoxication,
prescription or illegal drugs, or any other physical or mental cause that may expose the user or others to injury.
6.3
Always wear proper Personal Protective Equipment.
6.4
Keep hands and feet clear of moving parts including the Engagement Arm.
6.5
Do not use the equipment near electrical lines.
6.6
Do not allow passengers to ride on the safety cart.
6.7
Do not use on wet, slippery or icy substrates.
X-C
I
ALIBUR
NSTRUCTION
M
ANUAL
HOISTING GUIDE RING/
FORK POCKET
12
E
N
G
L
I
S
H
Advertisement
Table of Contents
