Button Mapping - Blackmagicdesign Videohub 12G Installation And Operation Manual

To activate a macro, simply press the macro button on the panel and then press 'take' to
confirm the switch.
Macros let you perform multiple simultaneous routes

Button Mapping

The labeled shortcut buttons on your Videohub's control panel are used to select groups of
equipment when changing routes. For example, if you have 3 HyperDeck sources with their
inputs labeled DECK 1, DECK 2 and DECK 3, you can press the DECK shortcut button to reduce
the selection to only those 3 sources. The reduced sources can then be selected using the
search dial or by pressing pushbuttons 1, 2, or 3. This is especially helpful when using larger
Videohubs with many types of equipment connected.
If you want to create a new shortcut button label, it's important to also change the coresponding
physical button label on the unit. Refer to the 'labeling pushbuttons' section for more information.
To map a shortcut button label:
1 Click on a labeled shortcut button and type a label in the text field. It's important to keep
the label consistent with the corresponding input and output labels. For example, if your
HyperDeck sources are labeled DECK 1, DECK 2, DECK 3, etc, they will be recognized by
a shortcut button mapped with the label 'DECK'.
Blackmagic Videohub Setup 49