Adjusting The Blade Speed; Recycling The Clippings - Toro STRIPE 21620 Operator's Manual

Adjusting the Blade Speed

This machine has 2 blade-speed settings: A
•
When set to the A
UTO
cutting conditions are detected and the blade speed increases when necessary to maintain quality of cut.
•
When set to the M
AX
Press the blade-speed button on the electric-start housing to adjust the blade speed setting
1. Blade-speed button

Recycling the Clippings

Your machine comes from the factory ready to recycle the grass and leaf clippings back into the lawn.
Important:
Ensure that the rear plug is locked in place. To lock the plug, raise the rear deflector (A of
Figure 15), and firmly push the plug down until it snaps into place (B of
Note:
To unlock the rear plug, rotate the lever on the plug to the right
UTO
setting, the blade speed is adjusted automatically for greater efficiency; changes in
setting, the blade speed remains at the highest speed at all times.
and M .
AX
Figure 14
Figure 15
(Figure
17
(Figure 14).
Figure 15).
16).
g422656
g378112