Adjusting The Blade Speed - Toro Recycler 21566T Operator's Manual

Adjusting the Blade Speed

This machine has 2 blade-speed settings: A
M .
AX
•
When set to the A
UTO
is adjusted automatically for greater efficiency;
changes in cutting conditions are detected and
the blade speed increases when necessary to
maintain quality of cut.
•
When set to the M
AX
remains at the highest speed at all times.
Turn the electric-start button in the electric-start switch
to either position to adjust the blade speed setting
(Figure 17).
Figure 17
1. A position
UTO
UTO
position, the blade speed
position, the blade speed
2. M position
AX
and
g337279
21