During Operation; Starting The Machine; Using The Self-Propel Drive - Toro STRIPE 21620 Operator's Manual

During Operation

Starting the Machine

1. Ensure that the battery pack is charged and installed in the machine; refer to
(page 14).
2. Squeeze the blade-control bar and hold it to the handle (A of
3. Press the electric-start button and keep it pressed until the motor starts (B of

Using the Self-Propel Drive

•
To engage the self-propel drive, pull the
self-propel-drive bar to the handle and hold it
(Figure 12).
Figure 12
1. Self-propel-drive bar
Note:
To adjust the ground speed, adjust the
speed control knob (Figure 13).
Figure
Figure 11
1. Speed-control knob
•
To disengage the self-propel-drive, release the
g422669
self-propel drive bar.
16
Installing the Battery Pack
11).
Figure 11).
Figure 13
g422654
g422658