Breaking In A New Machine; During Operation; During Operation Safety - Toro Grandstand HDM 74532 Operator's Manual

Table of Contents

Advertisement

Checking the Shutdown Circuit Chart
Note:
The state of system item(s) that is bold is being checked in each scenario.
Engine
Running idle (1/3
throttle)
State of
System
Engine
Running idle (1/3
throttle)
State of
System

Breaking in a New Machine

New engines take time to develop full power. Mower
decks and drive systems have higher friction when
new, placing additional load on the engine. Allow
40 to 50 hours of break-in time for new machines to
develop full power and best performance.

During Operation

During Operation Safety

General Safety
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
System
PTO (Blades)
Motion Control Levers
Engaged
Both levers out (neutral lock)
System
Parking Brake
Motion Control Levers
Engaged
Both levers not in neutral
16
Never carry passengers on the machine and keep
bystanders and pets away from the machine
during operation.
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate
the machine when there is the risk of lightning.
Wet grass or leaves can cause serious injury if
you slip and contact the blade. Avoid mowing in
wet conditions.
Before you start the engine, ensure that all drives
are in neutral, the parking brake is engaged, and
you are in the operating position.
Ensure that you have good footing while using this
machine, especially when backing up.
Keep your hands and feet away from the cutting
units. Keep clear of the discharge opening at all
times.
Look behind and down before backing up to be
sure of a clear path.
Use extreme care when approaching blind
corners, shrubs, trees, or other objects that may
block your view.
Stop the blades whenever you are not mowing.
Stop the machine, remove the ignition key, and
wait for all moving parts to stop before inspecting
the mower deck or attachment after striking an
object or if there is an abnormal vibration in the
Outcome
PTO must begin shutdown within
1 second; engine stays running.
Outcome
Engine must begin shutdown
within 1 second

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand hdm 74535

Table of Contents