Performing A Soft Reset; Performing A Hard Reset - Palm Tungsten Tungsten E Handbook

Performing a soft reset

A soft reset tells your handheld to stop what it's doing and start over again. All
records and entries stored on your handheld are retained with a soft reset. After a
soft reset, the Preferences screen appears and the Date and Time option is
highlighted so you can reset the date and time if needed.
To perform a soft reset:
Use the tip of an unfolded paper clip (or similar object without a sharp tip) to
gently press the reset button inside the hole on the back panel of your handheld.

Performing a hard reset

With a hard reset, all records and entries stored on your handheld are erased.
Never perform a hard reset unless a soft reset does not solve your problem.
NOTE
the next HotSync operation.
To perform a hard reset:
Press and hold the power button on the top panel of the handheld.
1.
While holding the power button, use the tip of an unfolded paper clip (or
2.
similar object without a sharp tip) to gently press and release the reset button.
You can restore any data previously synchronized with your computer during
Resetting your handheld
Reset button
275