Performing A Remote Hotsync Operation - Palm PalmModem Handbook

Insert phone cable
Note: It is important to use a standard analog phone line, such as
those used in homes. If you use your modem in an office or
hotel, make sure it is connected to a phone line with a data
port, a fax line, or a modem line. If you accidentally use a
digital phone line, your modem will respond as though there
is no dial tone.

Performing a remote HotSync operation

After you connect your modem to your handheld, you can use your
modem to perform remote HotSync operations by dialing your PC
modem or network server.
Important: Remember to leave your computer running so you can
perform remote operations.
To perform a modem or network HotSync operation:
Press the HotSync button on the front of your modem to initiate
remote HotSync operations.
If you have any problems conducting a successful HotSync operation,
see "Frequently Asked Questions" in your handheld handbook.
Page 16 Using Your PalmModem® Connectivity Kit