Sensor Installation - Toro TEMPUS-AG-4G User Manual

Step 2
ASSOCIATION
1. Unscrew the TEMPUS-AG-MS 's cap
2. Plug the 9V 6LR61 ou 6AM6 battery and screw the cap
3. Sign in with your MyToroTempus account
4. Launch MyToroTempus app from your smartphone or tablet.
5. Click on the «Add a controller» button or on the «+» button
6. Choose the TEMPUS-AG-MS from the availade controllers list.
7. To finish your TEMPUS-AG-MS pairing, follow the next steps described in the app.
Note: To identify your TEMPUS-AG-MS among the nearby controllers, please refer to the «Default name» present on its product label.
Security key
The security key allows to protect your controller. You can define it during the step 6 of the «ASSOCIATION» or access to further information by clicking on the
icon at the top right of your screen.
Step 3
PAIRING WITH TEMPUS-AG-4G/WF
To optimize the LoRa radio connection between theTEMPUS-AG-4G/WF and the TEMPUS-AG-MS device, we advise to install the TEMPUS-AG-MS under 800 meters
TM
to theTEMPUS-AG-4G/WF. We also advise to associate all your Tempus AG device near the TEMPUS-AG-4G/WF before installing them.
1. On the MyToroTempus mobile App, select your TEMPUS-AG-4G/WF and enter pairing mode on the Information screen. (You must be connected via Bluetooth)
2. Select the TEMPUS-AG-MS previously installed.
3. Click on the top right icon
4. Click on«Remote Access».
5. Select the TEMPUS-AG-4G/WF you want to pair the device with.
6. Click on the button «Send» or
TEMPUS-AG-4G/WF and your TEMPUS-AG-MS
7. Go back to «Remote access» screen.
8. Click on the button to start the test.
Note:
- The message «Connection established» means that the connection is reliable.
- The message «No connection established» means that it is necessary to bring the TEMPUS-AG-CT closer to the TEMPUS-AG-4G/WF or vice versa.
Step 4

SENSOR INSTALLATION

To ease the sensor installation we advise to follow the MyToroTempus mobile application instruction.
1. Get closer than 10 meters from TEMPUS-AG-MS and make sure your smartphone's Bluetooth is turned on.
2. Launch MyToroTempus app from your smartphone or tablet.
3. Select the TEMPUS-AG-MS previously installed. (The two devices, smartphone and MS device, must be connected via Bluetooth)
4. Click on "Add a sensor"
5. Select the type of sensor you want connect to your TEMPUS-AG-MS.
6. Select the sensor you want connect to your TEMPUS-AG-MS.
7. To properly connect the wiring and complete the sensor installation, follow the next steps described in the app.
to access to the product's informations.
on the bottom of your screen to validate. Once the pairing finished, you can test the connection between your