Solar Panel Connection - Toro TEMPUS-AG-4G User Manual

Step 6
SOLAR PANEL ASSEMBLY
The solar panel can be mounted on the wall or on a pole 40 to 60 mm in diameter, or with the addition of jaws on a pole of 60 to 230 mm.

Solar Panel Connection

During the first installation, before connecting the solar
panel, it is necessary to charge the TEMPUS-AG-4G battery,
turned off, for 24 hours with 230 VAC power supply.
After 24h of charging, disconnect the transformer and
connect the solar panel.
Prohibited connections
230V
SOLAR PANEL ASSEMBLY HIGH WIND FIXATION
The Solar panel has another type of attachment sold apart from the so-called "high wind" for
exposures of the solar panel to winds above 50kmph.
FOR THE DETAILS OF THE ASSEMBLY OF THE PANEL AND THE FLANGES,
REFER TO THE INSTRUCTIONS PROVIDED IN THE BOX OF BINDINGS
230V
FOR THE DETAILS OF THE ASSEMBLY OF THE PANEL AND THE FLANGES,
REFER TO THE INSTRUCTIONS PROVIDED IN THE BOX OF BINDINGS
✔