Removing The Flip Cover; Changing The Faceplate - Palm m100 Series Getting Started

Removing the flip cover

To remove the cover:
Grasp the hinge with your thumb.
1.
Gently rock the cover from one side
2.
to the other until the hinge prongs
release from the handheld.

Changing the faceplate

To remove the faceplate:
Remove the flip cover.
1.
Lift the faceplate tab slightly to
2.
separate it from the handheld; then
pull the faceplate away from the
handheld.
To attach the faceplate:
Align the bottom edge of the new
1.
faceplate with the slot on the
bottom edge of the handheld.
Gently press the top of the
2.
faceplate onto the handheld until it
clicks into position.
Removing the flip cover
2
1
13