Battery Power - Palm m100 Series Getting Started

Battery Power

For best results, handhelds should be between 10 centimeters (about 4
inches) and 1 meter (about 39 inches) apart, and the path between the
two handhelds must be clear of obstacles.
To beam:
Display what you want to
1.
beam onscreen.
Tap the Menu icon.
2.
In the menu that drops down,
3.
tap the Beam command.
Before you move your handhelds out of beaming position, wait for the
Beam Status dialog box to indicate that the transfer is complete.
Battery Power
Your handheld is recharged each time you place the handheld in the
cradle. Just place your handheld in the cradle for at least two hours for
an initial charge before you use it. Then place it in the cradle for ten to
fifteen minutes each day to recharge the battery to full capacity.
If the battery gets low, your handheld displays a warning message. If
this occurs, perform a HotSync operation and then recharge the
battery as soon as possible. If your handheld shuts down, you still
have about a week to recharge the battery before you lose the data on
your handheld.
12
To receive beamed information:
Turn on your handheld.
1.
(Optional) Tap the category
2.
pick list and select where you
want the information to be
stored on your handheld.