Step 8: Set Up Your Handheld To Access Your E-Mail - Palm Tungsten Tungsten W Getting Started

Put the Palm™ Desktop software
2.
CD-ROM into the CD-ROM
drive.
Follow the instructions
Windows:
that appear on your computer
screen.
: Double-click the
Mac
Palm Desktop Installer icon. Mac
users, keep these points in mind:
– If you are upgrading from another Palm handheld that has a
username, you cannot use that old username on your new
Tungsten W handheld. So when the Installer asks you to select
your old username or create a new one, you must create a new
username.
– Install adds files to the Add-on folder on your computer. To
take full advantage of applications on your handheld, you need
to transfer these files to your handheld. For detailed
instructions on installing files on your handheld, read the
relevant section in "Installing Palm™ Desktop software," in
"Troubleshooting."
If installation does not begin as described or stalls, see "Installing
Palm™ Desktop software," in "Troubleshooting." If the HotSync
operation does not execute during installation, see "Performing
HotSync operations," in "Troubleshooting."
After you install Palm Desktop software, you can open the electronic
Handbook for Palm™ Tungsten™ W Handhelds. See "Read the
Handbook" later in this guide for details.

Step 8: Set up your handheld to access your e-mail

If you have an existing e-mail account, you can set up the VersaMail
e-mail application to access your e-mail.
If you are using a well-known ISP such as Yahoo! or CompuServe,
many of the settings required for account setup are automatically
configured. For information about other ISPs, go to
support/tungstenw
.
Install software
www.palm.com/
13