palmOne Treo 600 Using Instructions page 30

For best performance, plug
your USB synchronization
cable directly into a USB
port on your computer. If
you use a USB hub, make
sure it is a powered hub.
30 :: Setting up your computer
Connecting your Treo to your computer
1. Plug the AC charger into a wall outlet. If necessary, connect an adapter.
2. Connect the charger to the short end of the HotSync cable. Be sure to match the
sides of the connectors labeled UP.
3. Plug the USB HotSync cable into an available USB port on your computer.
4. Connect the long end of the HotSync cable to the bottom of your Treo with the
button facing up.
A. USB cable
B. HotSync button
B
A