Advertisement
using your stand mixer
To attach bowl
1.
Lift the Tilt Release Lever and tilt mixer head back.
2.
Place bowl on bowl locking plate.
3.
Turn bowl gently in a clockwise direction so that bowl handle are perpendicular
to base.
4.
Plug your mixer into the mains supply socket.
To remove bowl
1.
Lift the Tilt Release Lever and tilt mixer head back.
2.
Turn bowl counter clockwise and lift off locking plate.
8
VFM027_22EM1 (UK).indd 8-9
VFM027_22EM1 (UK).indd 8-9
using your stand mixer
To install attachments
1.
Ensure the Control Dial is in the off position.
2.
Lift the Tilt Release Lever and tilt mixer head back.
3.
Align the key positions of the beater shaft and attachment, push upward.
4.
Twist counter clockwise so that pin aligns with attachment notch and clicks into
position.
To remove attachments
1.
Ensure the Control Dial is in the off position.
2.
Lift the Tilt Release Lever and tilt mixer head back.
3.
Press attachment upward as far as possible and turn clockwise.
4.
Pull attachment from beater shaft.
NOTE: It is recommended to scrape food off attachment with a spatula/scraper
before removing.
9
2022/4/6 8:49 AM
2022/4/6 8:49 AM
Advertisement
