TSC PEX-2000 Series User Manual page 41

After clicking Set button, it'll pop-up the window tip
6.
as below shown.
IP address will be shown in the "IP address" field
7.
and the Wi-Fi logo and IP address will be displayed
on the LCD control panel.
Note:
IP address should be shown within about 5~15
seconds after printer turn on. If not, please refer to
steps below to initialize the printer Wi-Fi module
settings then to setup it again.
Remove the cable between the computer and the
8.
printer.
Go to main page, click Add Printer to add the
9.
printer via Network.
10. Select the printer and enter the setting page by
double clicking the printer.
11. Click the Print Test Page button to print the test
page via Wi-Fi interface.
39