Page 1
Thank you for choosing AMKUS Rescue Systems. Please read this User Information Manual thoroughly. If you have any questions, please contact your local dealer or AMKUS, Inc. Please complete the tool registration form included with your equipment and return it to AMKUS, Inc. You may also register your equipment on-line at amkus.com.
Page 2
Getting Started basic operating and maintenance instructions only. 1. Connect the tool connection hoses to the hose lines from the AMKUS hydraulic power unit. Please note that the Read and understand the CAUTION male and female couplings on the hose lines leading from motor owner’s...
Page 3
Be careful not to lose it! Allow the hydraulic fluid to drain. Clean and replace the drain plug. Fill the hydraulic fluid reservoir with new AMKUS mineral base hydraulic fluid. Replace the fill plug/vent cap.
Page 4
Any problem not resolved by these suggestions may cleaned periodically. Be aware that while the couplings may require you to contact your local dealer or AMKUS, Inc. for be clean, the dust caps will accumulate dirt during use. Do further guidance.
Need help?
Do you have a question about the EF2S-STD and is the answer not in the manual?
Questions and answers