Viewing Results On A Personal Computer - Fora G20 Owner's Booklet

VIEWING RESULTS ON A PERSONAL COMPUTER

Results in memory can be transmitted to the personal computer. Health Care
Software System and an Interface Cable are required before installation. The
software can be downloaded from the home page of FORA, Inc. The interface
cable is an optional accessory. To learn more about Health Care Software Sys-
tem or to obtain an Interface Cable separately, please contact your Customer
Care Line at 1-888-307-8188, 1-866-469-2632.
Step 1. Installing the Software
Install Health Care Software System on your Computer by following the instruc-
tions provided on Fora Care's website: www.foracare.com/usa
Step 2. Connecting to a Personal Computer
Connect the interface cable to the serial
port in your computer. With the meter
turned off, connect the Interface Cable
to the Data Port of the meter. "PC" will
appear on the display, indicating that
the meter is ready to transmit data.
Step 3. Data transmission
Follow the instructions provided in the software to transmit data. Results
transmitted will include date and time. Remove the cable and the meter will
automatically turn off.
While the meter is connected to the PC, it is unable to perform a blood
glucose test.
NOTE
43