Viewing Results On A Personal Computer - Fora G20 Owner's Manual

VIEWING RESULTS ON A PERSONAL
COMPUTER
Results in memory can be transmitted to a personal computer. Health
Care Software System and an interface cable are required before
installation. The software can be downloaded from the home page of
ForaCare, Inc. An interface cable is required for data transmission, but
is not included in the standard kit. To learn more about Health Care
Software System or to obtain an interface cable separately, please
contact Customer Care Line at 1-888-307-8188 for help.
1. Install Software
Install Health Care Software System on your Computer by following the
instructions provided on ForaCare's website, www.foracare.com
2. Connect to Personal Computer
Connect the interface cable to a serial port of your computer. With the
meter turned off, connect the internal cable to the data port of the
meter. Then "PC" will appear on the display, indicating that the meter is
ready to transmit data.
3. Transmit Data
Follow the instructions to transmit data from the meters memory to your
computer. Results transmitted will include date and time. Remove the
cable and the meter will automatically turn off.
NOTE:
 While the meter is connected to the PC, it is unable to perform a blood
glucose test.
23